- Upstream release of 0.7.0

- ESX, VBox3, Power Hypervisor drivers
- new net filesystem glusterfs
- Storage cloning for LVM and Disk backends
- interface implementation based on netcf
- Support cgroups in QEMU driver
- QEmu hotplug NIC support
- a lot of fixes
Daniel

.cvsignore

@@ -10,3 +10,5 @@ libvirt-0.6.3.tar.gz
 libvirt-0.6.4.tar.gz
 libvirt-0.6.5.tar.gz
 libvirt-0.7.0-0.1.gitf055724.tar.gz
+libvirt-0.7.0-0.6.gite195b43.tar.gz
+libvirt-0.7.0.tar.gz

libvirt.spec

@@ -8,21 +8,24 @@
 %define with_vbox          0%{!?_without_vbox:1}
 %define with_sasl          0%{!?_without_sasl:1}
 %define with_avahi         0%{!?_without_avahi:1}
-%define with_polkit        0%{!?_without_polkit:1}
 %define with_python        0%{!?_without_python:1}
 %define with_libvirtd      0%{!?_without_libvirtd:1}
 %define with_uml           0%{!?_without_uml:1}
 %define with_one           0%{!?_without_one:1}
-# default to off
-%define with_phyp          0%{!?_without_phyp:0}
 %define with_network       0%{!?_without_network:1}
 %define with_storage_fs    0%{!?_without_storage_fs:1}
 %define with_storage_lvm   0%{!?_without_storage_lvm:1}
 %define with_storage_iscsi 0%{!?_without_storage_iscsi:1}
 %define with_storage_disk  0%{!?_without_storage_disk:1}
 %define with_numactl       0%{!?_without_numactl:1}
-# default to off
+
+# default to off - selectively enabled below
+%define with_polkit        0%{!?_without_polkit:0}
 %define with_capng         0%{!?_without_capng:0}
+%define with_netcf         0%{!?_without_netcf:0}
+
+# default to off
+%define with_phyp          0%{!?_without_phyp:0}
 
 # Xen is available only on i386 x86_64 ia64
 %ifnarch i386 i586 i686 x86_64 ia64
@@ -48,6 +51,10 @@
 %define with_capng     0%{!?_without_capng:1}
 %endif
 
+%if 0%{?fedora} >= 12
+%define with_netcf     0%{!?_without_netcf:1}
+%endif
+
 %if 0%{?fedora} >= 12
 %define qemu_user  qemu
 %define qemu_group  qemu
@@ -58,7 +65,6 @@
 
 #
 # If building on RHEL switch on the specific support
-# for the specific Xen version
 #
 %if 0%{?fedora}
 %define with_rhel5  0
@@ -72,10 +78,10 @@
 Summary: Library providing a simple API virtualization
 Name: libvirt
 Version: 0.7.0
-Release: 0.2.gitf055724%{?dist}%{?extra_release}
+Release: 1%{?dist}%{?extra_release}
 License: LGPLv2+
 Group: Development/Libraries
-Source: libvirt-0.7.0-0.1.gitf055724.tar.gz
+Source: libvirt-%{version}.tar.gz
 
 # Temporary hack till PulseAudio autostart problems are sorted
 # out when SELinux enforcing (bz 486112)
@@ -83,27 +89,16 @@ Patch200: libvirt-0.6.4-svirt-sound.patch
 
 BuildRoot: %{_tmppath}/%{name}-%{version}-%{release}-root
 URL: http://libvirt.org/
+BuildRequires: python-devel
 
 # The client side, i.e. shared libs and virsh are in a subpackage
 Requires: libvirt-client = %{version}-%{release}
 
-BuildRequires: python python-devel
-Requires: readline
-Requires: ncurses
 Requires: dnsmasq
 Requires: bridge-utils
 Requires: iptables
 # needed for device enumeration
 Requires: hal
-# So remote clients can access libvirt over SSH tunnel
-# (client invokes 'nc' against the UNIX socket on the server)
-Requires: nc
-%if %{with_sasl}
-Requires: cyrus-sasl
-# Not technically required, but makes 'out-of-box' config
-# work correctly & doesn't have onerous dependencies
-Requires: cyrus-sasl-md5
-%endif
 %if %{with_polkit}
 Requires: PolicyKit >= 0.6
 %endif
@@ -137,8 +132,6 @@ Requires: iscsi-initiator-utils
 # For disk driver
 Requires: parted
 %endif
-# For svirt support
-Requires: libselinux
 %if %{with_xen}
 BuildRequires: xen-devel
 %endif
@@ -199,6 +192,9 @@ BuildRequires: libcap-ng-devel >= 0.5.0
 %if %{with_phyp}
 BuildRequires: libssh-devel >= 0.3.1
 %endif
+%if %{with_netcf}
+BuildRequires: netcf-devel
+%endif
 
 # Fedora build root suckage
 BuildRequires: gawk
@@ -209,9 +205,8 @@ of recent versions of Linux (and other OSes). The main package includes
 the libvirtd server exporting the virtualization support.
 
 %package client
-Summary: client side library and utilities of the libvirt library
+Summary: Client side library and utilities of the libvirt library
 Group: Development/Libraries
-Requires: libxml2
 Requires: readline
 Requires: ncurses
 # So remote clients can access libvirt over SSH tunnel
@@ -228,7 +223,6 @@ Requires: cyrus-sasl-md5
 Shared libraries and client binaries needed to access to the
 virtualization capabilities of recent versions of Linux (and other OSes).
 
-
 %package devel
 Summary: Libraries, includes, etc. to compile with the libvirt library
 Group: Development/Libraries
@@ -260,9 +254,6 @@ of recent versions of Linux (and other OSes).
 
 %patch200 -p0
 
-mv NEWS NEWS.old
-iconv -f ISO-8859-1 -t UTF-8 < NEWS.old > NEWS
-
 %build
 %if ! %{with_xen}
 %define _without_xen --without-xen
@@ -344,6 +335,14 @@ iconv -f ISO-8859-1 -t UTF-8 < NEWS.old > NEWS
 %define _without_numactl --without-numactl
 %endif
 
+%if ! %{with_capng}
+%define _without_capng --without-capng
+%endif
+
+%if ! %{with_netcf}
+%define _without_netcf --without-netcf
+%endif
+
 %configure %{?_without_xen} \
            %{?_without_qemu} \
            %{?_without_openvz} \
@@ -364,32 +363,27 @@ iconv -f ISO-8859-1 -t UTF-8 < NEWS.old > NEWS
            %{?_without_storage_iscsi} \
            %{?_without_storage_disk} \
            %{?_without_numactl} \
+           %{?_without_capng} \
+           %{?_without_netcf} \
+           --with-qemu-user=%{qemu_user} \
+           --with-qemu-group=%{qemu_group} \
            --with-init-script=redhat \
            --with-remote-pid-file=%{_localstatedir}/run/libvirtd.pid
 make %{?_smp_mflags}
 gzip -9 ChangeLog
 
 %install
-rm -rf %{buildroot}
+rm -fr %{buildroot}
 
 %makeinstall
 (cd docs/examples ; make clean ; rm -rf .deps Makefile Makefile.in)
 (cd docs/examples/python ; rm -rf .deps Makefile Makefile.in)
 (cd examples/hellolibvirt ; make clean ; rm -rf .deps .libs Makefile Makefile.in)
 (cd examples/domain-events/events-c ;  make clean ;rm -rf .deps .libs Makefile Makefile.in)
-(cd python/tests ; rm -f *.py?)
-
 rm -f $RPM_BUILD_ROOT%{_libdir}/*.la
 rm -f $RPM_BUILD_ROOT%{_libdir}/*.a
 rm -f $RPM_BUILD_ROOT%{_libdir}/python*/site-packages/*.la
 rm -f $RPM_BUILD_ROOT%{_libdir}/python*/site-packages/*.a
-install -d -m 0755 $RPM_BUILD_ROOT%{_localstatedir}/run/libvirt/
-# Default dir for disk images defined in SELinux policy
-install -d -m 0755 $RPM_BUILD_ROOT%{_localstatedir}/lib/libvirt/images/
-# Default dir for kernel+initrd images defined in SELinux policy
-install -d -m 0755 $RPM_BUILD_ROOT%{_localstatedir}/lib/libvirt/boot/
-# used for virDomainMemoryPeek
-install -d -m 0700 $RPM_BUILD_ROOT%{_localstatedir}/cache/libvirt/
 
 %if %{with_qemu}
 # We don't want to install /etc/libvirt/qemu/networks in the main %files list
@@ -425,8 +419,19 @@ chmod 0644 $RPM_BUILD_ROOT%{_sysconfdir}/sysconfig/libvirtd
 %clean
 rm -fr %{buildroot}
 
+%pre
+%if 0%{?fedora} >= 12
+# Normally 'setup' adds this in /etc/passwd, but this is
+# here for case of upgrades from earlier Fedora. This
+# UID/GID pair is reserved for qemu:qemu
+getent group kvm >/dev/null || groupadd -g 36 -r kvm
+getent group qemu >/dev/null || groupadd -g 107 -r qemu
+getent passwd qemu >/dev/null || \
+  useradd -r -u 107 -g qemu -G kvm -d / -s /sbin/nologin \
+    -c "qemu user" qemu
+%endif
+
 %post
-/sbin/ldconfig
 
 %if %{with_libvirtd}
 %if %{with_qemu}
@@ -455,7 +460,9 @@ if [ $1 = 0 ]; then
 fi
 %endif
 
-%postun -p /sbin/ldconfig
+%post client -p /sbin/ldconfig
+
+%postun client -p /sbin/ldconfig
 
 %files
 %defattr(-, root, root)
@@ -489,13 +496,14 @@ fi
 %dir %{_localstatedir}/run/libvirt/
 
 %dir %{_localstatedir}/lib/libvirt/
-%dir %attr(0700, root, root) %{_localstatedir}/lib/libvirt/images/
+%dir %attr(0711, root, root) %{_localstatedir}/lib/libvirt/images/
 %dir %attr(0700, root, root) %{_localstatedir}/lib/libvirt/boot/
 %dir %attr(0700, root, root) %{_localstatedir}/cache/libvirt/
 
 %if %{with_qemu}
-%dir %{_localstatedir}/run/libvirt/qemu/
-%dir %attr(0700, root, root) %{_localstatedir}/lib/libvirt/qemu/
+%dir %attr(0700, %{qemu_user}, %{qemu_group}) %{_localstatedir}/run/libvirt/qemu/
+%dir %attr(0700, %{qemu_user}, %{qemu_group}) %{_localstatedir}/lib/libvirt/qemu/
+%dir %attr(0700, %{qemu_user}, %{qemu_group}) %{_localstatedir}/cache/libvirt/qemu/
 %endif
 %if %{with_lxc}
 %dir %{_localstatedir}/run/libvirt/lxc/
@@ -579,7 +587,7 @@ fi
 %dir %{_includedir}/libvirt
 %{_includedir}/libvirt/*.h
 %{_libdir}/pkgconfig/libvirt.pc
-%dir %{_datadir}/gtk-doc/html/libvirt
+%dir %{_datadir}/gtk-doc/html/libvirt/
 %doc %{_datadir}/gtk-doc/html/libvirt/*.devhelp
 %doc %{_datadir}/gtk-doc/html/libvirt/*.html
 %doc %{_datadir}/gtk-doc/html/libvirt/*.png
@@ -601,11 +609,53 @@ fi
 %doc python/TODO
 %doc python/libvirtclass.txt
 %doc docs/examples/python
-# %dir %{_datadir}/doc/libvirt-%{version}-%{release}/examples
-# %{_datadir}/doc/libvirt-%{version}-%{release}/examples/*.py
 %endif
 
 %changelog
+* Wed Aug  5 2009 Daniel Veillard <veillard@redhat.com> - 0.7.0-1.fc12
+- Upstream release of 0.7.0
+- ESX, VBox3, Power Hypervisor drivers
+- new net filesystem glusterfs
+- Storage cloning for LVM and Disk backends
+- interface implementation based on netcf
+- Support cgroups in QEMU driver
+- QEmu hotplug NIC support
+- a lot of fixes
+
+* Fri Jul 31 2009 Mark McLoughlin <markmc@redhat.com> - 0.7.0-0.9.gite195b43
+- Set perms on /var/lib/libvirt/images to 0711
+
+* Thu Jul 30 2009 Mark McLoughlin <markmc@redhat.com> - 0.7.0-0.8.gite195b43
+- Add patch from upstream to fix qemu pidfile perms problem
+
+* Thu Jul 30 2009 Daniel P. Berrange <berrange@redhat.com> - 0.7.0-0.7.gite195b43
+- Create qemu/kvm user & group to fix upgrades
+
+* Wed Jul 29 2009 Daniel Veillard <veillard@redhat.com> - 0.7.0-0.6.gite195b43
+- another prerelease with qemu, uml and remote patches
+- drop the news patch as it's now UTF8 upstream
+
+* Wed Jul 29 2009 Mark McLoughlin <markmc@redhat.com> - 0.7.0-0.5.gitf055724
+- Move ldconfig call to libvirt-client %post/%postun
+- Fix rpmlint warning about libvirt-client summary
+- Fix disabling polkit and netcf on older fedoras
+
+* Wed Jul 29 2009 Mark McLoughlin <markmc@redhat.com> - 0.7.0-0.4.gitf055724
+- Drop explicit libselinux requires, it is autorequired
+- Drop cleanup of python/tests, apparently not needed
+- Cherry-pick upstream patch to convert NEWS to UTF-8, drop iconv
+- Drop python BR; python-devel requires it
+
+* Tue Jul 28 2009 Mark McLoughlin <markmc@redhat.com> - 0.7.0-0.3.gitf055724
+- Enable netcf support
+- Pass --with-qemu-user=qemu etc. to configure
+- Move various requires to the libvirt-client sub-package
+- Sync some trivial cleanups from upstream spec file
+- Remove explicit libxml2 requires, again
+- Build with --without-capng if capng support is disabled
+- Remove explicit dir creating in makeinstall, replaced by attr in files
+- Set perms on /var/{run,lib,cache}/libvirt/qemu
+
 * Tue Jul 28 2009 Mark McLoughlin <markmc@redhat.com> - 0.7.0-0.2.gitf055724
 - Drop glusterfs dep to 2.0.1 (bug #514191)
 

sources

@@ -1 +1 @@
-7c8008af99963682cb38666d2f1661ba  libvirt-0.7.0-0.1.gitf055724.tar.gz
+8c2c14a7695c9c661004bcfc6468d62d  libvirt-0.7.0.tar.gz