Upstream release 0.6.1, Daniel

Setup DBus threading. Don't allow dbus to call _exit / change SIGPIPE (rhbz #484553)
Fix timeout when autostarting session daemon

branch

@@ -0,0 +1 @@
+F-10

libvirt.spec

@@ -10,6 +10,8 @@
 %define with_polkit    0%{!?_without_polkit:0}
 %define with_python    0%{!?_without_python:1}
 %define with_libvirtd  0%{!?_without_libvirtd:1}
+%define with_uml       0%{!?_without_uml:1}
+%define with_network   0%{!?_without_network:1}
 
 # Xen is available only on i386 x86_64 ia64
 %ifnarch i386 i686 x86_64 ia64
@@ -20,20 +22,31 @@
 %define with_xen_proxy 0
 %endif
 
-%if "%{fedora}"
+%if 0%{?fedora}
 %ifarch ppc64
 %define with_qemu 0
 %endif
 %endif
 
-%if 0%{fedora} >= 8
+%if 0%{?fedora} >= 8
 %define with_polkit    0%{!?_without_polkit:1}
 %define with_xen_proxy 0
 %endif
 
+#
+# If building on RHEL switch on the specific support
+# for the specific Xen version
+#
+%if 0%{?fedora}
+%define with_rhel5 0
+%else
+%define with_rhel5 1
+%endif
+
+
 Summary: Library providing a simple API virtualization
 Name: libvirt
-Version: 0.4.6
+Version: 0.6.1
 Release: 1%{?dist}%{?extra_release}
 License: LGPLv2+
 Group: Development/Libraries
@@ -47,6 +60,8 @@ Requires: ncurses
 Requires: dnsmasq
 Requires: bridge-utils
 Requires: iptables
+# needed for device enumeration
+Requires: hal
 # So remote clients can access libvirt over SSH tunnel
 # (client invokes 'nc' against the UNIX socket on the server)
 Requires: nc
@@ -88,6 +103,7 @@ BuildRequires: readline-devel
 BuildRequires: ncurses-devel
 BuildRequires: gettext
 BuildRequires: gnutls-devel
+BuildRequires: hal-devel
 %if %{with_avahi}
 BuildRequires: avahi-devel
 %endif
@@ -120,6 +136,8 @@ BuildRequires: lvm2
 BuildRequires: iscsi-initiator-utils
 # For disk driver
 BuildRequires: parted-devel
+# For QEMU/LXC numa info
+BuildRequires: numactl-devel
 Obsoletes: libvir
 
 # Fedora build root suckage
@@ -197,6 +215,18 @@ of recent versions of Linux (and other OSes).
 %define _without_libvirtd --without-libvirtd
 %endif
 
+%if ! %{with_uml}
+%define _without_uml --without-uml
+%endif
+
+%if %{with_rhel5}
+%define _with_rhel5_api --with-rhel5-api
+%endif
+
+%if ! %{with_network}
+%define _without_network --without-network
+%endif
+
 %configure %{?_without_xen} \
            %{?_without_qemu} \
            %{?_without_openvz} \
@@ -206,6 +236,9 @@ of recent versions of Linux (and other OSes).
            %{?_without_polkit} \
            %{?_without_python} \
            %{?_without_libvirtd} \
+           %{?_without_uml} \
+           %{?_without_network} \
+           %{?_with_rhel5_api} \
            --with-init-script=redhat \
            --with-qemud-pid-file=%{_localstatedir}/run/libvirt_qemud.pid \
            --with-remote-file=%{_localstatedir}/run/libvirtd.pid
@@ -216,7 +249,10 @@ rm -fr %{buildroot}
 
 %makeinstall
 (cd docs/examples ; make clean ; rm -rf .deps Makefile Makefile.in)
-(cd docs/examples/python ; rm -f Makefile Makefile.in)
+(cd docs/examples/python ; rm -rf .deps Makefile Makefile.in)
+(cd examples/hellolibvirt ; make clean ; rm -rf .deps .libs Makefile Makefile.in)
+(cd examples/domain-events/events-c ;  make clean ;rm -rf .deps .libs Makefile Makefile.in)
+
 rm -f $RPM_BUILD_ROOT%{_libdir}/*.la
 rm -f $RPM_BUILD_ROOT%{_libdir}/*.a
 rm -f $RPM_BUILD_ROOT%{_libdir}/python*/site-packages/*.la
@@ -238,6 +274,11 @@ rm -f $RPM_BUILD_ROOT%{_sysconfdir}/libvirt/qemu/networks/default.xml
 rm -f $RPM_BUILD_ROOT%{_sysconfdir}/libvirt/qemu/networks/autostart/default.xml
 # Strip auto-generated UUID - we need it generated per-install
 sed -i -e "/<uuid>/d" $RPM_BUILD_ROOT%{_datadir}/libvirt/networks/default.xml
+%else
+rm -f $RPM_BUILD_ROOT%{_sysconfdir}/libvirt/qemu/networks/default.xml
+rm -f $RPM_BUILD_ROOT%{_sysconfdir}/libvirt/qemu/networks/autostart/default.xml
+rm -f $RPM_BUILD_ROOT%{_datadir}/augeas/lenses/libvirtd_qemu.aug
+rm -f $RPM_BUILD_ROOT%{_datadir}/augeas/lenses/tests/test_libvirtd_qemu.aug
 %endif
 %find_lang %{name}
 
@@ -256,11 +297,12 @@ rm -fr %{buildroot}
 /sbin/ldconfig
 
 %if %{with_libvirtd}
+%if %{with_qemu}
 # We want to install the default network for initial RPM installs
 # or on the first upgrade from a non-network aware libvirt only.
 # We check this by looking to see if the daemon is already installed
 /sbin/chkconfig --list libvirtd 1>/dev/null 2>&1
-if [ $? != 0 ]
+if [ $? != 0 -a ! -f %{_sysconfdir}/libvirt/qemu/networks/default.xml ]
 then
     UUID=`/usr/bin/uuidgen`
     sed -e "s,</name>,</name>\n  <uuid>$UUID</uuid>," \
@@ -268,6 +310,7 @@ then
          > %{_sysconfdir}/libvirt/qemu/networks/default.xml
     ln -s ../default.xml %{_sysconfdir}/libvirt/qemu/networks/autostart/default.xml
 fi
+%endif
 
 /sbin/chkconfig --add libvirtd
 %endif
@@ -302,6 +345,7 @@ fi
 %{_sysconfdir}/rc.d/init.d/libvirtd
 %config(noreplace) %{_sysconfdir}/sysconfig/libvirtd
 %config(noreplace) %{_sysconfdir}/libvirt/libvirtd.conf
+%config(noreplace) %{_sysconfdir}/logrotate.d/libvirtd
 %endif
 
 %if %{with_qemu}
@@ -318,11 +362,42 @@ fi
 %{_datadir}/libvirt/networks/default.xml
 %endif
 
+%dir %{_datadir}/libvirt/
+%dir %{_datadir}/libvirt/schemas/
+
+%{_datadir}/libvirt/schemas/domain.rng
+%{_datadir}/libvirt/schemas/network.rng
+%{_datadir}/libvirt/schemas/storagepool.rng
+%{_datadir}/libvirt/schemas/storagevol.rng
+%{_datadir}/libvirt/schemas/nodedev.rng
+%{_datadir}/libvirt/schemas/capability.rng
+
 %dir %{_localstatedir}/run/libvirt/
+
 %dir %{_localstatedir}/lib/libvirt/
 %dir %attr(0700, root, root) %{_localstatedir}/lib/libvirt/images/
 %dir %attr(0700, root, root) %{_localstatedir}/lib/libvirt/boot/
 
+%if %{with_qemu}
+%dir %{_localstatedir}/run/libvirt/qemu/
+%dir %attr(0700, root, root) %{_localstatedir}/lib/libvirt/qemu/
+%endif
+%if %{with_lxc}
+%dir %{_localstatedir}/run/libvirt/lxc/
+%dir %attr(0700, root, root) %{_localstatedir}/lib/libvirt/lxc/
+%endif
+%if %{with_uml}
+%dir %{_localstatedir}/run/libvirt/uml/
+%dir %attr(0700, root, root) %{_localstatedir}/lib/libvirt/uml/
+%endif
+%if %{with_network}
+%dir %{_localstatedir}/run/libvirt/network/
+%dir %attr(0700, root, root) %{_localstatedir}/lib/libvirt/network/
+%dir %attr(0700, root, root) %{_localstatedir}/lib/libvirt/iptables/
+%dir %attr(0700, root, root) %{_localstatedir}/lib/libvirt/iptables/filter/
+%dir %attr(0700, root, root) %{_localstatedir}/lib/libvirt/iptables/nat/
+%endif
+
 %if %{with_qemu}
 %{_datadir}/augeas/lenses/libvirtd_qemu.aug
 %{_datadir}/augeas/lenses/tests/test_libvirtd_qemu.aug
@@ -337,6 +412,7 @@ fi
 %{_datadir}/PolicyKit/policy/org.libvirt.unix.policy
 %endif
 
+%dir %attr(0700, root, root) %{_localstatedir}/log/libvirt/
 %if %{with_qemu}
 %dir %attr(0700, root, root) %{_localstatedir}/log/libvirt/qemu/
 %endif
@@ -354,7 +430,6 @@ fi
 %attr(0755, root, root) %{_sbindir}/libvirtd
 %endif
 
-%doc docs/*.rng
 %doc docs/*.xml
 
 %files devel
@@ -372,6 +447,7 @@ fi
 %doc docs/*.html docs/html docs/*.gif
 %doc docs/examples
 %doc docs/libvirt-api.xml
+%doc examples
 
 %if %{with_python}
 %files python
@@ -387,6 +463,55 @@ fi
 %endif
 
 %changelog
+* Wed Mar  4 2009 Daniel Veillard <veillard@redhat.com> - 0.6.1-1.fc10
+- upstream release 0.6.1
+- support for node device detach reattach and reset
+- sVirt mandatory access control support
+- many bug fixes and small improvements
+
+* Wed Feb 18 2009 Daniel P. Berrange <berrange@redhat.com> - 0.6.0-3.fc10
+- Fix QEMU startup timeout/race (rhbz #484649)
+- Setup DBus threading. Don't allow dbus to call _exit / change SIGPIPE (rhbz #484553)
+- Fix timeout when autostarting session daemon
+
+* Fri Feb  6 2009 Daniel P. Berrange <berrange@redhat.com> - 0.6.0-2.fc10
+- Fix libvirtd --timeout usage
+- Fix RPC call problems and QEMU startup handling (rhbz #484414)
+- Fix unowned directories (rhbz #483442)
+
+* Sat Jan 31 2009 Daniel Veillard <veillard@redhat.com> - 0.6.0-1.fc10
+- upstream release 0.6.0
+- thread safety of API
+- allow QEmu/KVM domains to survive daemon restart
+- extended logging capabilities
+- support copy on write storage volumes for QEmu/KVM
+- support of storage cache control options for QEmu/KVM
+- a lot of bug fixes
+
+* Wed Dec 17 2008 Daniel Veillard <veillard@redhat.com> - 0.5.1-2.fc10
+- fix missing read-only access checks, fixes CVE-2008-5086
+
+* Fri Dec  5 2008 Daniel Veillard <veillard@redhat.com> - 0.5.1-1.fc10
+- upstream release 0.5.1
+- mostly bugfixes e.g #473071
+- some driver improvments
+
+* Wed Nov 26 2008 Daniel Veillard <veillard@redhat.com> - 0.5.0-1.fc10
+- upstream release 0.5.0
+- domain lifecycle event support
+- node device enumeration
+- KVM/QEmu migration support
+- improved LXC support
+- SDL display configuration
+- User Mode Linux driver (Daniel Berrange)
+
+* Wed Sep 24 2008 Daniel Veillard <veillard@redhat.com> - 0.4.6-3.fc10
+- apply the python makefile patch for #463733
+
+* Wed Sep 24 2008 Daniel Veillard <veillard@redhat.com> - 0.4.6-2.fc10
+- upstream release 0.4.6
+- fixes some problems with 0.4.5
+
 * Tue Sep  9 2008 Daniel Veillard <veillard@redhat.com> - 0.4.5-2.fc10
 - fix a crash if a QEmu/KVM domain is defined without an emulator path
 

sources

@@ -1 +1 @@
-abdf727deaffd868172f7243eb75ffe3  libvirt-0.4.6.tar.gz
+3154ea9d4a0778497dfdf58cb98127c0  libvirt-0.6.1.tar.gz